How to Use WAXTRAK

Application Instructions

Clean your board COMPLETELY free of any wax, wax residue and dust.

Identify placement location for the WAXTRAK.

Peel down the top half of the backing and affix the upper portion of the WAXTRAK to the board, carefully running your fingers from the center to the edges to work out any air pockets. Lift and re-position if needed.

Peel off remaining backing and carefully smooth the WAXTRAK onto the board from center to outside edge.

Press all edges of the WAXTRAK down firmly to the board. A plastic straight edge, like a bank card, should be used in application to create a tight seal along the smooth outer edges.

Press the entire WAXTRAK onto the board once again by hand, working out any air pockets.

Apply base-coat wax until large, well-defined bumps form on the textured pattern.

Apply top-coat surf wax over the base-coat before each surf session.

For best results, the WAXTRAK should be changed every 2 to 3 months.

View All Our Products

Shop Now